ALUMINIUM PRECISION STRIP
Require cut sheet from coil?
Free-issue or from stock
Thicknesses: 0.20mm – 3.0mm
Widths: 10mm – 620mm
Length: 50mm – 3,500mm
Aluminium
Aluminium is remarkable for its ability to resist corrosion and its lightweight nature. Crucial to the aerospace industry and commonly used in transportation, packaging, water treatment, construction, cooking utensils, electrical transmission lines, heat sinks and more.
We supply a range of aluminium including aluminium clad in coil and sheet used predominantly in the automotive industry.
Thicknesses ranging from:
0.05mm – 4.0mm
Whatever your requirement,
10kgs – 10,000kgs we can help.
In-house precision slitting from
5mm – 670mm
Designations for Aluminium Alloys
| Alloying Element | Wrought |
|---|---|
| None (99%+ Aluminium) | 1XXX |
| Copper | 2XXX |
| Manganese | 3XXX |
| Silicon | 4XXX |
| Magnesium | 5XXX |
| Magnesium + Silicon | 6XXX |
| Zinc | 7XXX |
| Lithium | 8XXX |
| 4045 (double and single sided) | 5%-15% |
| 4343 (double and single sided) | 5-15% |
| 3003 core grade |
Temper designations
| Code | Description |
|---|---|
| F | As Fabricated (no property limits speified) |
| O | Fully Annealed, Soft |
| H111 | Some work hardening imparted by shaping processes but less than required for H11 |
| H112 | Alloys that have some tempering from shaping but no special control over the amount of strain-hardening or thermal treatment. Some strength limts apply. |
| H115 | Armour Plate |
| H116 | Special corrosion resistant temper |
| H12 | Work hardened to quarter hard, not annealed after rolling |
| H14 | Work hardened to half hard, not annealed after rolling. |
| H16 | Work hardened to three-quarter hard, not annealed after rolling |
| H18 | Work hardened to fully hard, not annealed after rolling |
| H19 | Work hardened to Extra Hard, not annealed after rolling |
| H24 | Work hardened then partially annealed to half hard |
| H26 | Work hardened then partially annealed to three-quarter hard |
| H28 | Work hardened then partially annealed to fully hard |
| H32 | Work hardened then stabilised by low-temperature heat treatment to quarter-hard |
| H321 | Strain hardened less than required for a controlled H32 temper |
| H323 | A version oh H32 that has been specially fabricated to provide acceptable resistance to stress corrosion cracking |
| H34 | Stabilised, Half-Hard - A low temperature thermal treatment or heat induced during manufacture which stabliises the mechanical properties and relives residual internal stress, usually improves ductility. Only applies to alloys which, unless stabilised, gradually age-soften at room temperature. |
| H343 | H34 specially fabricated to provide acceptable resistance to stress corrosion cracking |
| H36 | Work hardened then stabilised by low-temperature heat treatment to three-quarter hard |
| H38 | Work hardened then stabilised by low-temperature heat treatment to fully hard |
Aluminium Data Sheet
| Chemical Compositions | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALLOY NUMBER | EURO NAME | ASTM NAME | TYPICAL CHEMICAL COMPOSITION % | ||||||||||
| UNS | Al (min) | Cr | Cu | Fe | Mg | Mn | Si | Ti | V | Zn | Others | ||
| 1000 SERIES (PURE) | |||||||||||||
| 1050 | AW-1050 | A91050 | Balance | - | 0.05 | 0.04 | 0.05 | 0.05 | 0.25 | 0.03 | 0.05 | 0.05 | - |
| 1050A | AW-1050A | A91050A | 99.5 | - | 0.05 | 0.04 | 0.05 | 0.05 | 0.25 | 0.05 | - | 0.07 | 0.03 |
| 1060 | AW-1060 | A91060 | 99.6 | - | 0.05 | 0.35 | 0.03 | 0.03 | 0.25 | 0.03 | 0.05 | 0.05 | 0.03 |
| 3000 SERIES (ALLOYED WITH MANGANESE) | |||||||||||||
| 3003 | AW-3003 | A93003 | Balance | - | 0.05 - 0.20 | 0.7 | - | 1.0 - 1.5 | 0.6 | - | - | 0.1 | Others (each): 0.05 Others (total): 0.15 |
| 3004 | AW-3004 | A93004 | Balance | - | 0.25 | 0.7 | 0.8 - 1.3 | 1.0 - 1.5 | 0.3 | - | - | 0.25 | Others (each): 0.05 Others (total): 0.15 |
| 3103 | AW-3103 | A93103 | Balance | 0.1 | 0.1 | 0.7 | 0.3 | 0.9 - 1.5 | 0.5 | 0.1 | - | 0.2 | Zr + Ti: 0.1 Others (each): 0.05 Others (total): 0.15 |
| 3104 | AW-3104 | A93104 | Balance | - | 0.05 - 0.25 | 0.8 | 0.8 - 1.3 | 0.8 - 1.4 | 0.6 | 0.1 | 0.05 | 0.25 | Ga: 0.05 Others (each): 0.05 Others (total): 0.15 |
| 5000 SERIES (ALLOYED WITH MAGNESIUM) | |||||||||||||
| 5005 | AW-5005 | A95005 | Balance | 0.1 | 0.2 | 0.7 | 0.5 - 1.1 | 0.2 | 0.3 | - | - | 0.25 | Others (each): 0.05 Others (total): 0.15 |
| 5019 | AW-5019 | A95019 | Available on Request | ||||||||||
| 5050 | AW-5050 | A95050 | Balance | 0.1 | 0.2 | 0.7 | 1.1 - 1.8 | 0.1 | 0.4 | - | - | 0.25 | Others (each): 0.05 Others (total): 0.15 |
| 5052 | AW-5052 | A95052 | Balance | 0.15 - 0.35 | 0.1 | 0.4 | 2.2 - 2.8 | 0.1 | 0.25 | - | - | 0.1 | Others (each): 0.05 Others (total): 0.15 |
| 5056 | AW-5056 | A95056 | Available on Request | ||||||||||
| 5251 | AW-5251 | A95251 | Balance | 0.15 | 0.15 | 0.5 | 1.7 - 2.4 | 0.10 - 0.50 | 0.4 | 0.15 | - | 0.15 | Others (each): 0.05 Others (total): 0.15 |
| 5556A | AW-5556A | A95556A | Available on Request | ||||||||||
| 5754 | AW-5754 | A95754 | Balance | 0.3 | 0.1 | 0.4 | 2.6 - 3.6 | 0.5 | 0.4 | 0.15 | - | 0.2 | Mn + Cr: 0.10 - 0.60 Others (each): 0.05 Others (total): 0.15 |
| 6000 SERIES (ALLOYED WITH MAGNESIUM & SILICON) | |||||||||||||
| 6061 | AW-6061 | A96061 | Balance | 0.04 - 0.35 | 0.15 - 0.40 | 0.7 | 0.8 - 1.2 | 0.15 | 0.4 - 0.8 | 0.15 | - | 0.25 | Others (each): 0.05 Others (total): 0.15 |
| 6060 | AW-6060 | A96060 | Balance | <0.05 | <0.1 | 0.1-0.3 | 0.35-0.6 | <0.1 | 0.3-0.6 | <0.1 | - | <0.15 | - |
| 6063 | AW-6063 | A96063 | Balance | <0.1 | <0.1 | <0.35 | 0.45-0.9 | <0.1 | 0.2-0.6 | <0.1 | - | - | - |
| 6082 | AW-6082 | A96082 | Balance | 0.25 | 0.1 | 0.5 | 0.6 - 1.2 | 0.4 - 1.0 | 0.7 - 1.3 | 0.1 | - | 0.2 | Others (each): 0.05 Others (total): 0.15 |
| 7000 SERIES (ALLOYED WITH ZINC) | |||||||||||||
| 7072 | W-7072 | A97072 | Balance | - | 0.1 | Si + Fe: 0.7 | 0.1 | 0.1 | Si + Fe: 0.7 | - | - | 0.8 - 1.3 | Others (each): 0.05 Others (total): 0.15 |
| 8000 SERIES (ALLOYED WITH OTHER) | |||||||||||||
| 8011 | AW-8011 | A98011 | 97.3 - 98.9 | 0.05 | 0.1 | 0.60 - 1.00 | 0.05 | 0.2 | 0.50 - 0.90 | 0.08 | - | 0.1 | 0.05 |
| 8111 | AW-8111 | A9811 | Balance | 0.05 | 0.1 | 0.4 - 1.0 | 0.05 | 0.1 | 0.3 - 1.1 | 0.08 | - | 0.1 | Others (each): 0.05 Others (total): 0.15 |
